Adjustment Of Pinion Height - Ford TRADER Workshop Manual

tpiE'Ai+j
9TGOMX·146
FRONT BEARING
INNER RACE
REAR BEARING
INNER RACE
9TGOMX·149
9TGOMX·1SO
9TGOMX·1S1
DIFFERENTIAL
M
[W type)
Adjustment of pinion height
1. Adjust the pinion height as follows with the SST.
(1) Slide the new rear bearing inner race onto the SST, then
install them into the carrier.
(2) Install the front bearing inner race, companion flange and
washer onto the SST, and tighten the nut so that the SST
can still be turned by hand.
caution
• Do not install the adjustment shim.
(3) Install the bearing housing assembly into the carrier.
Tightening torque:
20-29 N·m (2.0-3.0
m-kg,
15-22
ft-Ib)
(4) Place the SST on the surface plate and set the-dial indi-
cator to zero.
M-33