9TGOJ1·0SO
TRANSMISSION
J1
Countershaft assembly
1. Remove the snap ring from the counter 5th gear and move
the counter 5th gear toward the front of the transmission.
Caution
• Do not tap the bearing inner race.
2. Gently strike the front of the countershaft with a brass ham-
mer and remove the bearing outer race from the rear.
3. Remove the countershaft assembly from the transmission
case.
Countershaft front bearing
1. Move the bearing away from the spacer with a chisel and
a hammer.
2. Remove the bearing with the SST.
J1-25