Ford TRADER Workshop Manual page 434

J1
9TGOJ1·089
IPliu11S11
'ijliui'SiD
IkD·lfl .. i'
gTGOJH'90
9TGOJ1·093
J1-38
TRANSMISSION
Spacer
1. Install the new spacer with the SST.
Countershaft front bearing
1. Press the bearing inner race onto the countershaft with the
SST.
Countershaft assembly
1. Set the countershaft assembly in the transmission case.
2. Set the counter 5th gear to its normal position and fit the
snap ring.
Adjustment shim
1. Install the clutch housing.
Tightening torque:
120-155 N·m (12.2-15.8 m-kg, 88-114 ft-Ib)
2. Drive in the rear bearing outer race with a punch or similar
tool.
3. Measure the depth of the rear bearing outer race in the trans-
mission case. Select a shim(s) plus to adjust the clearance
between the outer race and the case adapter to specifi·
cation.
Specification:
Measured depth + 0.3mm (0.012 in)
=
0.01-O.05mm (0.0004-0.0019 in)