Ford TRADER Workshop Manual page 513

M
FRONT AXLE
Disassembly
I Inspection I
Assembly
1. Disassemble in the order shown in the figure, referring to Disassembly Note.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly, referring to Assembly Note.
1. Bearing inner race (Outer)
Inspect for damage and rotation
2. Oil seal
9TFOMX-OOS
5. Bearing outer race (Outer)
Disassembly Note .......... ; ............. page M-8
Assembly Note ............................ page M-9
Assembly Note ............................ page M-9 6. Wheel hub
3. Bearing inner race (Inner)
Inspect for damage and rotation
4. Bearing outer race (Inner)
7. Hub bolt
Disassembly Note ........................ page M-9
Assembly Note ............................ page M-9
Disassembly Note ........................ page M-8
M-8
Assembly Note ............................ page M-9
Disassembly Note
Bearing outer race
Caution
• Replace the inner and outer race as a set.
• Do not reuse the removed oil seal.
Note
• When removing the bearing outer race (Inner), the
inner race (Inner) and oil seal will also come out.
1 . Tap the bearing outer race at the notches in the
wheel
hub
(shown by arrows) with a brass bar and a hammer to re-
move it.