Ford TRADER Workshop Manual page 409

FILLER PLUG HOLE
TRANSMISSION OIL
J1
9TGOJ1·013
FILLER PLUG
9TFOJ1·006
TRANSMISSION OIL
INSPECTION
Caution
• Position the vehicle on level ground.
1. Remove the filler plug.
2. Verify that the oil is at the bottom of the filler plug hole.
If it is low, add the specified oil from filler plug.
3. Wipe clean and apply sealant to the plug threads before
installing the plug.
Tightening torque:
33-S1
N·m
(3.4-S.2
m-kg,
2S-38
ft-Ib)
REPLACEMENT
1. Remove the drain plug, and drain the oil into a suitable con-
tainer.
2. Wipe clean and apply sealant to the plug threads.
3. Install the drain plug.
Tightening torque:
33-S1 N-m (3.4-S.2 m-kg, 2S-38 ft-Ib)
4. Add the specified oil from the filler plug hole until the level
reaches the bottom of the hole.
Specified oil:
Type API Service GL-4 or GL-S
SAE 7SW-90
Capacity W'lthout sub-transmission
3.S liters (3.7 US qt, 3.1 Imp qt)
With sub-transmission
3.3 liters (3.S US qt, 2.9 Imp qt)
5. Apply sealant to the filler plug threads.
6. Install the filler plug.
Tightening torque:
33-S1
N·m
(3.4-S.2
m-kg,
2S-38
ft-Ib)
J1-13