Ford TRADER Workshop Manual page 475

J2
TRANSMISSION
INSPECTION '
Inspect all parts, and repair or replace as necessary.
9MUOJX-QSS
9TGOJ2-QSS
9TGOJ2.()56
"
Each
~,and
main ckive gear
1. Inspect the synchronizer cones for wear.
2. Inspect the gear teeth for damage, wear,'
3. Inspect the synchronizer ring matching
or wear.
4. Inspect the main drive gear splines for
\t
.,'
.~ ,,~
,.
Mainshaft
1. Measure the mainshaft runout.
Runout: 0.035mm (0.0014 in) max.
2. Inspect the splines for damage and wear.
";".,' ,
•
'
.
Counte~, .
1. Inspect gear'.th' for damage, wear and
crac~.
2. Inspect the splines for damage and wear.
Shift fork and change lever'
1. Measure the clearance between the shift fork and the
change lever.
Clearance: 0.8mm (0.032 in) max.