Adjusting Plug; Worm Ball Nut Assembly - Ford TRADER Workshop Manual

MANUAL STEERING
N
9TGONX.()34
RACE
9TGONX'()36
Disassembly note
Adjusting plug
1. Remove the locknut with the SST.
2. Remove the adjusting plug with the SST.
3. Press the oil seal out with a 23mm
(15/16 in)
socket from
the front side as shown.
4. Press the outer race out with a socket and the SST as
shown.
Worm ball nut assembly
1. Remove the two inner races with the SST.
N-17