Table of Contents
Advertisement
WINDSHIELD
s
Removal note
Windshield and weatherstrip
1. Pry the weatherstrip outward from within the cabin wtth SST.
2.
Remove the windshield together with the weatherstrip.
Installation note
Windshield and weatherstrip
1 .
Remove the sealant from the body surface.
2. Fit the weatherstrip onto the windshield.
3.
Insert heavy string around the weatherstrip.
4. Apply soapy water to ensure smooth installation between
the weatherstrip and the body.
5.
Locate the glass and weatherstrip squarely in the windshield
frame.
Note
• The following operation must
be
done with a
partner.
6. Tap lightly on the outside of the windshield while pulling the
string to install the weatherstrip around the entire circum-
ference.
7. Move the glass by hands on the inside and outside of the
glass if it is not properly seated.
8.
Protect the body around the window flame with maSking
tape.
9. Fill with sealant between the weatherstrip and body and be-
tween the weatherstrip and glass around the entire circum-
ference.
S-37
Advertisement
Table of Contents
Troubleshooting
