Ford TRADER Workshop Manual page 442

J1
J1-46
A
I--
CLUTCH HOUSING
9TGOJ1-116
TRANSMISSION
Adjustment shim
1. After measuring dimensions A and B shown in the figure,
use an adjustment shim(s) with the thickness correspond-
ing to the value of A plus gasket thickness 0.3mm (0.012
in) minus B, so that bearing end play will be within specifi-
cation.
Bearing end play: 0-0.1 mm (0-0.004 in)
Adjustment shim thickness:
0.8 (0.031) 0.9 (0.035) 1.0 (0.039)
1.1 (0.043) 1.2 (0.047)
Oil seal
Caution
• Do not damage the mainshaft spline.
1. Install the oil seal with the SST.
Center brake drum
1. Install the center brake drum.
2. Hold the drum with the SST, and tighten the locknut.