Valve, Valve Spring And Valve Spring Seat - Ford TRADER Workshop Manual

B
9TGOB2·362
1€'··lfl-"'1
9TGOB2·363
9TGOB2·364
'U··'f4,
'
,'1
9TGOB2·365
INNER OUTER
9TGOB2·366
8-120
ASSEMBLY
3. Tap the valve guide in from the side opposite the combus-
tion chamber until the
SST
contacts the cylinder head.
4. Verify that the valve guide height is within specification.
Height: 14.2-14.4mm (0.559-0.567 in)
5.
If not within specification, repeat Steps
1-4.
Valve Seal
1.
Assemble the
SST
so that depth
L
is as specified.
Depth L: 15.5-15.9mm (0.610-0.626 in)
2.
Slide the valve seal onto the valve guide.
3. Set the SST against the valve seal.
Caution
• Do not use a hammer.
4. Press the valve seal on until the
SST
contacts the cylinder
head.
Valve, Valve Spring and Valve Spring Seat
1. Install the lower spring seat.
2.
Install the valve.
3. Install the valve springs (outer and inner) and the upper
spring seat.