2-22
9.
Evenly position supplied heat shrink tubing over wire repair.
10. Use a shielded heat gun to heat the repaired area until adhesive flows out of both ends for the heat shrink tubing.
11. Reconnect the battery ground cable.
Wiring Reference Information
Fusion/MKZ/Energi Wiring Diagram Excerpts
The following pages are from sections of the Fusion/MKZ/Energi Wiring Diagrams manual.
Ordering Information
To obtain information about ordering complete copies of Ford publications, call 1-800-782-4356.
In addition, a publications order form can be obtained by writing to: Ford Publications, C/O Helm Inc., PO Box 07150, Detroit, MI 48207.
Available publications include Workshop Manuals, Wiring Diagrams manual, PC/ED Manuals and Owner's Literature.
Wiring Diagrams
WARNING:
The following wiring diagrams contain high-voltage circuits. Do not backprobe, splice, modify or repair in any way. The system
voltage is approximately 300 volts DC. Failure to follow this instruction may result in severe injury or death.
Charging System
Section 2: Electrical
2019 Fusion Hybrid Modifiers Guide, 8/2018
Electrical
© Copyright Ford 2018 FoMoCo