Snapshot Operations In The Multifunction Flexi Pad Control Block; Saving And Recalling Snapshots - Sony MVS-8000X User Manual

Snapshot Operations in
the Multifunction Flexi
Pad Control Block
SNAPSHOT button
Region selection buttons
Carry out snapshot operations on the Multifunction Flexi
Pad control block of the CCP-6224 or CCP-6324 Control
Panel as follows.

Saving and Recalling Snapshots

Saving a snapshot in the Multifunction
Flexi Pad control block
As an example, to save a snapshot on the M/E-1 bank, use
the following procedure.
1
In the M/E-1 bank, make the settings for the state you
want to save as a snapshot.
2
In the Multifunction Flexi Pad control block, press the
[SNAPSHOT] button.
This assigns the Multifunction Flexi Pad control block
to snapshot operations.
The alphanumeric display shows the register number
last recalled on the bank.
3
Press the region selection button corresponding to the
region for which you want to save, turning it on. You
can select more than one region.
74

Snapshot Operations in the Multifunction Flexi Pad Control Block

Alphanumeric display
Memory recall section
[M/E 1], [M/E 2], [M/E 3], [M/E 4], [M/E 5], [P/P]:
These select the corresponding M/E-1, M/E-2, M/
E-3, M/E-4, M/E-5, and PGM/PST regions.
Notes
To select [M/E 4] or [M/E 5], a previous button
assignment in the Setup menu is required (see
page 165).
[USER 1] to [USER 8]: These select the User regions.
[DME 1] to [DME 8]: These select the DME
channels.
[RTR]: This selects the Router region.
[ALL]: This selects all regions.
Notes
The regions that can be selected simultaneously are
those assigned to the region selection buttons in the
memory recall section (see page 165).
The first pressed button lights green as the reference
region. Subsequently pressed buttons turn amber for
the region select buttons and yellow for the memory
recall section buttons.
Pressing one of the amber or yellow buttons, while
holding down [SNAPSHOT], turns the button green to
indicate its corresponding region as the new reference
region.
For details of the precedence order for becoming the
reference region, see "Reference region" (page 29).
The display shows the name of the reference region
and the number of the register previously recalled for
that region.
4
Press the [BANK SEL] button, and select the desired
bank with the numeric keypad buttons in the memory
recall section.
5
Hold down the [SNAPSHOT] button, and press the
button in the memory recall section corresponding to
the register in which you want to save.
Notes
If you press a button which is lit orange or yellow, this
overwrites the contents of the corresponding register.
The button you pressed lights yellow, and this
completes saving.
To enter the number of the desired snapshot save
destination register using the numeric keypad
After step 3 above, press the [10 KEY] button in the
memory recall section. This switches the memory recall
section to the numeric keypad input mode, and after
pressing the [STOR] button, lighting it yellow, you can