Settings Relating To Video Switching (Transition Menu); Selecting The Bank To Make The Settings - Sony MVS-8000X User Manual

Knob Parameter Adjustment
1 Output No Output
connector
number
3
In the list on the right, select the AUX bus combination
to use.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment
2 Aux Mix AUX bus
combination
To disable AUX mix transitions, select [Disable].
4
Press [Set].
To cancel a setting after pressing [Set], press [Clear].
5
Repeat steps 2 to 4 as required.
6
Press [Execute].
Setting values
Settings Relating to Video
1 to 48
Switching (Transition
Menu)
For settings relating to video switching, use the Switcher
>Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 'Switcher' and
HF4 'Transition.'
Setting values
The status area shows the transition preview, key
1 to 25
transition, bus toggle, and split fader settings for each M/E
and PGM/PST bank.
The following functions are available here.
• Transition Preview: Specify the operation mode for
transition preview for each of the M/E and PGM/PST
banks.
• Key Transition: Specify the operation mode for
independent key transitions.
• Bus Toggle: Switch the bus toggle for each of the M/E
and PGM/PST banks on or off.
• Split Fader: When the bus toggle is off, the split fader
settings are enabled. For each of the M/E and PGM/PST
banks, select enable or disable.
• Fade To Black: Enable or disable fade-to-black for each
final program output.
• Preset Color Mix: Set the stroke mode for a preset color
mix, the key status for a transition including a key, and
the mode in which the transition type after a transition
ends returns to the previous setting.
• Transition Curve: Set the relationship when carrying
out a transition, between the fader lever position and the
advancement state of the transition.
Selecting the Bank to Make the
Settings
In the Transition menu, using any of the following
methods, select the bank to which the settings apply, then
make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1
The selected bank appears in reverse video.
Bank M/E or P/P selection
to which settings
apply

Settings Relating to Video Switching (Transition Menu)

Setting values
1 to 6
217