Sony MVS-8000X User Manual page 289

Icon Message
Success!!
But some Clip files had been renamed
because the same Clip name already
existed (–52)!
No external HDD was found (–2).
Format operation failed (–10).
Format operation failed (–11).
Cannot access the partition (–12).
Cannot access the directory (–20).
Cannot access the directory (–21).
The external HDD is busy (–22).
ERROR (–41).
Restore operation failed (–43).
Restore operation failed (–46).
No directory exists (–50).
Rename operation failed (–52).
Rename operation failed (–53).
Invalid FM OutCh (–6).
Specified FM OutCh was locked (–7).
Restore failed, some Clip files cannot
be deleted on this board (–8).
Not enough free register area for
Backup or Restore process (–10).
Prepare failed, insufficient Clip id
(–15).
Restore failed, Cannot find symbol
files on this tape (–18).
ERROR (–19). Bad register number.
Restore failed, file name already exist,
try to rename but unsuccessful (–20).
Cannot find the File Name Data,
please load the File Name Data first
(–21).
Description
2565: Frame Memory >External Device >Restore from DDR/VTR
Recalling a file from the external device was completed successfully.
However, some clips were renamed because of clip name conflicts.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, the external hard disk could not be found.
Check that the external hard disk is correctly connected.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, formatting of the hard disk failed.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, the logical drives of the external hard disk
could not be accessed. Check that the external hard disk is correctly
formatted.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, the directory of the external hard disk could
not be accessed.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, the external hard disk was busy and could not
be accessed. Check that the access lamp of the hard disk or the menu
indicator is turned off, and try again.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, the file could not be recalled from the external
hard disk because the clip is currently playing or recording.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, recalling a file from the external hard disk
failed.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, the specified directory did not exist.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed, renaming the directory failed.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the specified frame memory output
channel could not be used.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the specified frame memory output
channel was locked.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, restoring failed because a clip file could
not be deleted.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, there was insufficient capacity to carry
out the restore operation.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, there were insufficient Clip IDs (internal
processing error).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, a marker frame file could not be found.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the Register Number was an invalid
value (internal processing error).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, renaming failed.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the file list was not loaded.
289
Error Messages