Saving Files Recalled By Autoload - Sony MVS-8000X User Manual

Saving Files Recalled by
Autoload
If you save effect setting data, frame memory image files
and so on in the PWON_LD directory on the hard disk,
then when the system is powered on this data is recalled
automatically. This is known as the autoload function.
To save the data to be recalled by the autoload function,
use the menu for operations on individual files.
For the data recalled by the autoload function, see
"Saving data recalled by autoload" (page 126).
For the setting enabling or disabling the autoload
function, see "Setting Automatic Loading of Register Data
at Power On (Autoload Function)" (page 149).
For example, to save snapshot data, use the following
procedure.
1
In the File menu, select VF3 'Snapshot' and HF1
'Snapshot.'
The Snapshot menu appears.
2
In the device selection area on the left, select
[Register].
3
In the device selection area on the right, select [HDD].
Be sure to select [HDD] as the saving destination.
4
Select the PWON_LD directory.
The PWON_LD directory is automatically created
when [Power On File Load] is set to On in the System
>Start Up menu. If set to Off, the directory does not
appear.
5
Using any of the following methods, select the data to
be saved, and the file in which to save it.
• To select all files within the list, press [ALL] below
the list.
• To select multiple files, turn the knobs to select in
the following ranges.
Knob Parameter Adjustment
1 List L Select the first
register whose
data is to be
saved
2 List R Select the first file
to which data is to
be saved
Knob Parameter Adjustment
3
• To select a single file, press the arrow keys to scroll
the reverse video cursor, or directly press on the list
in the status area.
6
Press [tSave].
The data from the selected registers is saved in the
specified destination.
If the specified destination already contains data, a
confirmation message appears.
• Select "Yes" to overwrite the existing data.
• Select "No" to cancel the entire saving operation.
Setting values
1 to 99
1 to 99
Num Number of
registers to be
selected

Saving Files Recalled by Autoload

Setting values
1 to 99
139