Selecting Cross-Point Assign Tables; Exporting Source Names And Destination Names; Making Settings For Audio Mixer - Sony MVS-8000X User Manual

• Press directly on the list of copy sources (left-side
list) or the list of copy destinations (right-side list) in
the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Left No Selection of copy
source
2 Right No Selection of copy
destination
3
Press [Copy].
A confirmation message appears, asking whether or
not to execute the copy.
4
To execute the copy, press [Yes], and to cancel the
operation, press [No].

Selecting Cross-Point Assign Tables

You can select the cross-point assign table to be used for
each of the following banks or buses.
• M/E-1 to M/E-5 banks and PGM/PST bank
• Buses assignable to AUX delegation buttons
Notes
It is not possible to assign cross-point tables 5 to 14 to a bus
of a switcher operated by an MKS-8080/8082 AUX Bus
Remote Panel.
1
In the Panel >Xpt Assign menu, using any of the
following methods, select the switcher bank or bus.
• Press directly on the list on the left of the status area.
• Press the arrow keys on the list on the left to scroll
the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Bank/Bus Switcher bank or
No bus selection
2 Num Number of
selected
switcher banks
or buses
2
Using any of the following methods, select the table.
• Press directly on the list on the right of the status
area.
• Press the arrow keys on the list on the right to scroll
the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
3
3
Press [Table Assign Set].
This sets the table for the selected switcher bank or
Setting values
bus.
1 to 15
1 to 14
Exporting Source Names and
Destination Names
To send the source names and destination names to the S-
Bus, use the following procedure.
1
In the Panel >Xpt Assign menu, press [Name Export].
The Name Export menu appears.
2
Turn the knob to set the station ID.
Knob Parameter Adjustment
1
a) If set to 255, the information is sent to all stations (with display of
"All").
3
Press [Src Name Export].
This exports the source names to the station selected in
step 2.
4
Press [Dest Name Export].
This exports the destination names to the station
selected in step 2.
Notes
Since destination names cannot be selected freely,
fixed names are used.
Setting values
1 to maximum

Making Settings for Audio Mixer

value
1 to maximum
value
Enabling the function to link the audio
mixer
Notes
For audio mixer operations in this system, it is necessary
to set Mixer ESAM-II for the DCU 9-pin serial port.
For details, see "Serial Port Settings (Serial Port Assign
Menu)" (page 240).
Table No Selection of table
to be assigned
Station ID Station ID setting 1 to 255
Cross-Point Settings (Xpt Assign Menu)
Values
1 to 15
Setting values
a)
179