empty register common to all currently selectable
regions, press the [.] button again.
To search for an empty register in the 100 range, press
[1], [0], [0], [.] (period) in that order. Similarly, to
search for an empty register in the 200 range, press [2],
[0], [0], [.] (period), and to search for an empty register
in the 300 range, press [3], [0], [0], [.] (period).
The register number appears in the display. If the
number is followed by a letter "e" or "E," this indicates
the following.
e: The selected register is empty for the regions
selected in step 2.
E: The selected register is empty for all currently
selectable regions.
4
Press the [ENTER] button.
This recalls the specified register.
When the master timeline is recalled, the region
selection buttons light according to the saved region
information.
To recall the master timeline
1
In the Multifunction Flexi Pad control block, press the
[EFF] button.
This switches the Multifunction Flexi Pad control
block to the effect operation mode.
2
Press the [MSTR RCLL] button.
This switches the memory recall section to the master
timeline recall mode.
3
Press the [BANK SEL] button.
42
Recalling a Register
This switches the memory recall section to the bank
selection mode.
4
Press the number of the desired bank.
This selects the bank, and the buttons in the memory
recall section show the register states as follows.
Lit yellow: Last recalled register
Lit orange: Register holding data
Off: Empty register
5
Press the number of the desired register.
The button you pressed lights yellow, and this recalls
the master timeline.
The alphanumeric display shows the selected register
number.