For GPI input settings, see "Making Control Panel GPI
Input Settings" (page 192) and "Making DCU GPI Input
Settings" (page 236).
94
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
Macro Operations in the
Numeric Keypad Control
Block and the Keyframe
Control Block
This section describes macro operations carried out in the
numeric keypad control block and the keyframe control
block.
Notes
For a macro take operation (see "Macro Execution" (page
93)), the numeric keypad control block and keyframe
control block are not used. Use the [TAKE] button in the
Flexi Pad control block or the Multifunction Flexi Pad
control block.
For an overview of macros, see "Macros" (page 91).
For macro operations in the numeric keypad control block,
use the following buttons (see the following figure).
UNDO button
MCRO button
RCALL button
STORE button
For macro operations in the keyframe control block, use
the following buttons (see the following figure).
STORE STATS button
Display
Numeric keypad