Modifying Tally Generation; Deleting Tally Generation Settings; Tally Copy Settings (Tally Copy Menu); Making New Tally Copy Settings - Sony MVS-8000X User Manual

DCU1: Generate tally with reference to signal input to
DCU1 port. Set the port number with the knob.
DCU2: Generate tally with reference to signal input to
DCU2 port. Set the port number with the knob.
5
Turn the knob to select the tally input port number.
Knob Parameter Adjustment
5 Input No Tally input port
number
6
Press [Execute].
This sets the settings made in steps 2 to 5 as the
settings for tally generation.

Modifying Tally Generation

1
In the Router/Tally >Tally Enable menu, press
[Modify].
The Modify menu appears.
2
With reference to steps 2 to 5 in the preceding section
"Making New Tally Generation Settings," change the
parameters as required.
3
Press [Execute].

Deleting Tally Generation Settings

1
Using either of the following methods in the Router/
Tally >Tally Enable menu, select the tally generation
entry you want to delete.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
2
Press [Delete].
Tally Copy Settings (Tally
Copy Menu)
You can copy the tally information pertaining to a
particular source to a different source.
Setting values
For settings relating to the tally copy function, use the
1 to 102
Router/Tally >Tally Copy menu. The settings are common
to the parallel and serial tallies.
To display the Tally Copy menu
In the Engineering Setup menu, select VF6 'Router/Tally'
and HF5 'Tally Copy.'
The status area shows the tally copy status.

Making New Tally Copy Settings

1
In the Router/Tally >Tally Copy menu, select [New].
The New menu appears.
2
Turn the knob to select the copy-from source.
When setting more than one tally copy, you can
specify the copy-from source start and end addresses.
Knob Parameter Adjustment
1
2
3
Specify the copy-to source address.
Knob Parameter Adjustment
3
4
4
Press [Execute].
This makes the tally copy setting according to the
specifications in steps 2 and 3.

Modifying Tally Copy Settings

1
In the Router/Tally >Tally Copy menu, press
[Modify].
The Modify menu appears.
2
Use the knobs to select the copy source and copy
destination.
Copy From Copy-from source
(From) start address
Copy From Copy-from source
(To) end address
Copy To Copy-to source
(From) (start) address
Copy To Copy-to source
(To) (end) address

Tally Copy Settings (Tally Copy Menu)

Setting values
1 to 1024
1 to 1024
Setting values
1 to 1024
1 to 1024
251