Specifying Main Split Fader; Setting The Macro Execution Mode - Sony MVS-8000X User Manual

Joystick sensitivity in fine mode: In the <Joystick
Fine Mode> group, select [
Touch sensitivity for recalling menus by double-
clicking buttons: In the <Double Click> group,
select [Fast], [Normal], or [Slow].
Making advanced settings for the search
dial
1
In the Panel >Operation >Sensitivity menu, press
[Search Dial].
The Search Dial menu appears.
The status area shows a list of the settings and their
content.
2
Set the sensitivity for the search dial in jog mode.
When operated with the [JOG] button pressed to
be lit amber: In the <Jog Sensitivity> group,
press one of [1 (Slow)] to [6 (Fast)].
When operated with the [JOG] button held down:
In the <Jog Sensitivity (While pressing [JOG]
button)> group, press one of [1 (Slow)] to [6
(Fast)].
3
In the <SHTL/VAR Dial Range> group, select
[Narrow] or [Wide] to set the sensitivity for the search
dial in shuttle mode or variable mode.
Narrow: The search speed varies in a relatively
narrow range.
Wide: The search speed varies in a relatively wide
range.
For details of search dial operations, see "Controlling the
Tape/Disk Transport" (page 17).

Specifying Main Split Fader

In the <Main Split Fader> group of the Panel >Operation
menu, select [Left] or [Right].

Setting the Macro Execution Mode

1
Press [Macro] in the Panel >Operation menu.
The Macro menu appears.
2
In the <Macro Execution Mode> group, select the
macro execution mode.
Normal: normal execution mode
Step: step execution mode
1 1 1
/ ], [ / ], or [ / ].
2 4 8
3
In the <Flexi Pad Edit Mode> group, set the macro
editing mode of the standard type Flexi Pad to [Pause
Only] or [Full Editing].
This enables the standard type Flexi Pad control block
to be used for macro editing. Depending on the macro
editing mode setting, functions are assigned to the
memory recall buttons as shown in the following
figure.
When the setting is
[Pause Only]
4
When making a macro attachment setting, select
whether or not to enable cross-point button operations
in the <Attachment Setting Mode> group.
With Btn Function: enable cross-point button
operations
W/o Btn Function: disable cross-point button
operations
5
Using the <Macro 2nd Recall Mode> group, set the
action to occur during macro execution or when a
macro is stopped, if the cross-point button with the
macro attachment set is pressed again.
Continue: Execution of a macro that has been stopped
is resumed, and an executing macro continues.
Cancel: A stopped macro, or a macro during
execution is terminated.
6
Using the <Macro Recall Override> group buttons, set
the action to occur during macro execution or when a
macro is stopped, if another macro is recalled.
Disable: Ignore the other macro recall.
Enable: Execute the other macro.
To have a cross-point button with a macro
attachment set lit continuously
Press [Attchd Btn Indication], turning it on.
When the [MCRO ATTCH ENBL] button in the cross-
point control block is on, the cross-point button with a
macro attachment is constantly lit green.
Operation Settings (Operation Menu)
When the setting is
[Full Editing]
201