Assigning A Function To The Independent Key Transition Control Block (Simple Type) - Sony MVS-8000X User Manual

Buttons in the memory recall section during effect
editing
Function
Undo
Pause setting
Copy
Paste
Select all
Insert
Modify
Delete
Keyframe loop count
setting
Effect duration setting
Keyframe duration setting
Delay setting
Constant duration mode
on or off
Go to specified timecode
Go to specified keyframe
Set range
Return the button display
to that before effect was
executed
Switch to numeric keypad
input mode
Go to first keyframe
Switch to shifted functions
Go to previous keyframe
Go to next keyframe
Execute effect
The functions of the buttons in the memory recall
section during effect editing are on two pages; to set
the functions of buttons on the second page, press [2]
in the <Page Select> group in the button area.
Buttons in the memory recall section during macro
editing
Function
Undo
Pause setting
Auto insert mode on or off
Copy
Paste
Select all
Insert
Modify
Delete
174
Overall Control Panel Settings (Config Menu)
Button indication
UNDO
PAUS
COPY
PSTE
ALL
INS
MOD
DEL
KF LOOP
EFF DUR
KF DUR
DLY
CNST DUR
GOTO TC
GOTO KF
FROM TO
EXIT
STOR
REWIND
SHFT
<< PREV
>> NEXT
RUN
Button indication
UNDO
PAUS
AUTO INS
COPY
PSTE
ALL
INS
MOD
DEL
Function
Set range
Go to specified event
6
Press [Set] to confirm the setting.
To cancel an assignment
Select the button, then press [Clear].
To return all button assignments to the factory default
state, press [Default].
Assigning a Function to the
Independent Key Transition Control
Block (Simple Type)
You can assign a function to the buttons in the independent
key transition control block (simple type).
The assignment may be to the independent key transition
type selection buttons and buttons in the independent key
transition execution section.
1
In the Panel >Config menu, press [Link/Program
Button].
The Link/Program Button menu appears.
2
Press [Compact Key Trans Module].
The Compact Key Transition Module menu appears.
3
In the <Bank Select> group, select the bank you want
to manipulate.
4
According to the selected bank, select the control
block to be assigned, in the <Module Select> group.
The currently assigned function is displayed in the
area that displays the buttons in the selected control
block.
The functions currently
assigned to the buttons in the
selected control block appear.
Button indication
FROM TO
GOTO EVNT
Button Assign list
(Assignable functions
are displayed)