Time Settings; Setting The Keyframe Duration - Sony MVS-8000X User Manual

[PSTE] button: Paste a keyframe (see page 47).
[ALL] button: Select all keyframes in an effect (see page
45).
[STOR] button: Save the effect (see page 59).
[INS] button: Insert a keyframe (see page 45)
[MOD] button: Modify a keyframe (see page 45).
[DEL] button: Delete a keyframe (see page 47).
[REWIND] button: Move to the first keyframe in the
effect (see page 57).
[SHFT] button: Enable the shift function of the button
pressed together with this one.
[<< PREV] button: Move the edit point to the previous
keyframe (see page 44).
[>> NEXT] button: Move the edit point to the next
keyframe (see page 44).
[RUN] button: Run the effect (see page 57).
[EFF DUR] button: Set the effect duration (see page 54).
[KF DUR] button: Set the keyframe duration (see page
53).
[DLY] button: Set a delay (see page 54).
[KF LOOP] button: Set a keyframe loop (see page 48).
[CNST DUR] button: Switch the duration mode (see
page 49).
[GOTO TC] button: Move the edit point to the specified
timecode position (see page 44).
[GOTO KF] button: Move the edit point to the specified
keyframe position (see page 44).
[FROM TO] button: Switch to the mode for inputting
ranges with the numeric keypad (see page 45).

Time Settings

You can determine the execution time of an effect by
setting either the keyframe durations or the effect duration
(see page 32).

Setting the Keyframe Duration

DELAY button
Keyframe control block
Setting the keyframe duration
You can set the value of the keyframe duration
independently for each keyframe, by the following
method.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect on the keyframe for which you want to
set the duration.
The time from this keyframe to the following
keyframe is what you set.
3
Press the [KF DUR] button, turning it on.
The display in the numeric keypad control block
shows "KF DUR" followed by the duration of the
current keyframe (seconds:frames).
4
Using the numeric keypad in the numeric keypad
control block, enter the timecode value for the
keyframe duration, as a maximum of four digits.
KF DUR button
EDIT ENBL button
EFF DUR button
Time Settings
53