Sony MVS-8000X User Manual page 118

• Press directly on the menu macro register list.
• Press the arrow keys on the right list to scroll the
reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Menu
Macro
Register
3
Press [Recall & Run x] or [Recall x] (x is the number
of the register selected in the menu macro register list).
• To execute the menu macro at the same time as
recalling the register, press [Recall & Run x].
• To recall the register only, press [Recall x].
Executing a menu macro
In the Macro >Menu Macro Register >Recall & Run
menu, check that you are not in macro editing mode, then
use the following procedure.
1
Using any of the following methods, specify the event
from which you want to execute.
• Press directly on the menu macro register
configuration list.
• Press the arrow keys on the right list to scroll the
reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
3 No
2
Press [Run].
To stop execution of a macro
Press [Stop].
To move to the start of a menu macro event
Press [Rewind].
Recalling a menu macro register from a
macro register
Menu macro recall and execution operations can be saved
as events in a control panel macro, and then recalled.
If with the control panel in macro editing mode you
execute a menu macro, then this operation is recorded as
an event.
For details of recalling operations, use the following
references, depending on the control panel or menu used.
• Using the numeric keypad control block and the
keyframe control block: page 95
• Using the standard type Flexi Pad control block: page
100
118
Menu Macros
Setting values
Register 1 to 99
selection
Setting values
Select start 1 to maximum
event value
• Using the simple type Flexi Pad control block: page 102
• Using the Multifunction Flexi Pad control block: page
105
• Using menus: page 109
Registering a menu macro in the shortcut
menu
1
In the Home >Favorites >Button Edit menu, select a
button to register.
2
Press [MenuMacro Set].
The Menu Macro Set menu appears.
The "L/E" indications have the following meanings.
L: The register is locked.
E: The register is empty.
L/E indication
3
In the list on the left, select the button number to be
assigned.
4
Press [Set].
Executing a menu macro in the shortcut
menu
1
Select the Home >Favorites >Shortcut menu.
The following screen appears.