Delete Button - Sony MVS-8000X User Manual

• Data: Event details in the form of parameters and data
For details of the event components, see "Macro File
Editing Rules" (page 260).
The cursor shows the current event in the list, in reverse
video. You can turn knob 1 to scroll the list, but this does
not change the cursor position. Depending on the switcher
status, the cursor color changes as follows.
• Yellow: in macro editing mode
• Gray: when the editing mode is exited by a control panel
operation
• Blue: during macro execution
f ALL button
Selects all events in the macro register listing.
g Macro creation event list
Shows the event being created or executed in the control
panel.
h Insert Before button
Inserts a created event immediately before the selected
event in the macro register listing.
i Insert After button
Inserts a created event immediately after the selected event
in the macro register listing.
j Delete button
Deletes the selected event in the macro register listing.
k Modify button
Replaces the selected event in the macro register listing
with a created event.
l <Prev button
Moves the cursor to the event immediately before the
selected event in the macro register listing.
m >Next button
Moves the cursor to the event immediately after the
selected event in the macro register listing.
Carrying out online editing of macro
events
In the On Line Edit menu, you can carry out the following
editing operations on the events in the macro register.
• Insert: Insert a macro event.
• Delete: Delete a macro event.
• Modify: Modify a macro event.
Notes
It is not possible to save editing results using this menu
alone. Carry out the necessary control panel operations to
save the edited register.
108
Macro Editing Using Menus
To insert an event
1
On the control panel, if auto insert mode is on, switch
it off.
2
On the control panel, create a macro event.
The created event appears in the macro creation event
list.
For more details of the display, see "Macro File Editing
Rules" (page 260).
3
In the macro register listing, press [<Prev] or [>Next]
to select the position where you want to insert the
created event.
4
Carry out either of the following.
To insert before the event selected in the list: Press
[Insert Before].
To insert after the event selected in the list: Press
[Insert After].
This inserts the created event either before or after the
specified event.
Notes
In the following cases, [Insert Before] and [Insert
After] are disabled, and it is not possible to insert the
event.
• If the memory or register is full.
• The size of the created macro event is larger than the
memory or register space available.
• When multiple events are selected.
• When the number of events has reached 99.
• When not in macro editing mode.
1) While a macro is being executed on the control panel, when macro
saving has been executed, or when the [EXIT] button in the Flexi Pad
control block or Multifunction Flexi Pad control block has been
pressed
5
Operate the control panel to save the editing result.
To delete an event
1
In the macro register listing, press [<Prev] or [>Next]
to select the event you want to delete.
To select all events in the register, press [All].
2
Press [Delete].
Notes
If not in macro editing mode
and it is not possible to delete the selected event.
1) While a macro is being executed on the control panel, when macro
saving has been executed, or when the [EXIT] button in the Flexi Pad
control block or Multifunction Flexi Pad control block has been
pressed
1)
1)
, [Delete] is disabled,