Paths - Sony MVS-8000X User Manual

the duration of the deleted keyframe. Thus the effect
duration does not change.
Deletion Change in effect duration
position
Deletion of the
first keyframe
Deletion of an
intermediate
keyframe
Deletion
between two
keyframes
Deletion of the
last keyframe
Keyframe deletion position and the change in effect duration
Delay setting
You can set the delay from the time of executing an
operation to run the effect, and the effect actually starting
(that is, the delay until the first keyframe). You can make
this setting in the keyframe control block.
Note that changing the delay does not alter the duration of
the effect.

Paths

The term "path" refers to the specification of how
interpolation is carried out from one keyframe to the next.
Images are interpolated from an edit point to the next one
according to the path setting.
For details of the path setting procedure, see "Path
Settings" (page 55).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 to M/E-5, and P/P menus
Item Paths that can be set
M/E1 to M/E5, P/P For each M/E and PGM/PST, path
All settings for the following items are
made simultaneously.
Key1 to Key8 Overall path settings for items relating
to keys 1 to 8 are made
Key1 All to
simultaneously.
Key8 All
Source Key source path for keys 1 to 8
Fill Key fill path for keys 1 to 8
Proc Proc path for keys 1 to 8
Trans Transition path for keys 1 to 8
Bkgd/Util Overall path settings for items relating
to the background and utility buses
Bkgd/Util All
are made simultaneously.
Bkgd A Path for background A
Bkgd B Path for background B
Util 1 Path for utility 1
Util 2 Path for utility 2
DME 2nd Path for video to be used for second
Video DME channel
Wipe/DME Wipe Overall path settings for items relating
to wipes and DME wipes are made
Wipe/DME
simultaneously.
Wipe All
Wipe Path for wipes
DME Wipe Path for DME wipes
Trans – Transition path for each M/E and P/P
bank
User1 to User8 menus
The items that can be adjusted depend on the settings in the
Setup menu.
For details, see "Setting User Regions" (page 206).
Item Paths that can be set
User1 All to User8 All Overall path settings for the
following items for each "User" are
made simultaneously.
FM All Overall path settings for frame
memory items are made
simultaneously.
FM Still Store Overall path settings for frame
memory freeze image output are
FM Still Store
made simultaneously.
All
FM Still Store Paths for frame memory freeze
1 to 8 image outputs 1 to 8
Aux Overall path settings for AUX buses
are made simultaneously.
Aux All
Aux 1 to 48 Paths for AUX 1 to 48
33
Keyframes