Recalling A Register - Sony MVS-8000X User Manual

2
For no display, press [Display], turning it off. To
display, press once more, turning it on.
When [Active Region] is off, regions with the
"Display Off" setting are not displayed in the Timeline
menu.
To return to the default precedence order and
timeline menu display settings
Press [Default] in the <Priority> group.

Recalling a Register

Use the numeric keypad control block or Multifunction
Flexi Pad control block to recall a register. For each region
there are 99 registers dedicated to keyframes, numbered
from 1 to 99.
When creating an effect as a user programmable DME, use
a 3-digit register number which is commonly used for all
DME regions (channels).
For a description of the concept of regions and registers,
see "Regions" (page 29) and "Registers" (page 30).
The master timeline can also be recalled from the standard-
type Flexi Pad control block.
Recalling a register from the numeric
keypad control block
UNDO button
EFF button
RCALL button
Region selection buttons
Numeric keypad control block
1
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to
keyframe operations, and the [RCALL] button lights.
2
Press the button corresponding to the region you want
to select, turning it on.
You can also press more than one button.
[M/E 1], [M/E 2], [M/E 3], [M/E 4], [M/E 5], [P/P]:
These select the corresponding M/E-1, M/E-2, M/
E-3, M/E-4, M/E-5, and PGM/PST regions.
Display
39
Recalling a Register