Register Operations In The Menus; Effect Attribute Settings; Effect Status Display; Effect Register Editing - Sony MVS-3000 System User Manual

5
Select a region.
You can select more than one region.
To select all regions, press [ALL]. To select all
switcher-related regions (M/E, P/P, User), press [SWR
ALL].
6
Press [Assign], turning it on.
If the selected register is locked, a confirmation
message appears asking whether or not to cancel the
operation. Press [OK] to return to the previous menu
display without carrying out the registration.
If the operation is carried out, the region selected in
step 5 is registered on the master timeline, and the
parameters are now valid.
7
Select the number of the effect register.
No. Parameter
3 Effect Reg
8
Repeat steps 5 to 7 as required to set all regions and
register numbers to be saved on the master timeline.
9
In the <Store> group, press [Store].
To return to the state before saving the master
timeline content
In the <Store> group, press [Undo].
Register Operations in
the Menus
Using the Effect menu, you can carry out the following
effect register operations.

• Effect Attribute Settings

• Effect Status Display

• Effect Register Editing

Here, the menu for dedicated effect registers 1 to 99 is
described as an example.
For registers for P-Bus and Device1 to Device12, carry out
similar operations using VF6 (DEV/PBUS Effect 1-250).
Effect Attribute Settings
Applying effect dissolve
To apply the "effect dissolve" attribute to a keyframe
effect, use the following procedure.
1
Open the Effect >Effect 1-99 >Attribute menu (6221).
164

Register Operations in the Menus

Adjustment
Effect register number
(1 p. 164)
(1 p. 164)
(1 p. 164)
2
Press the region display in the upper part of the list,
and in the selection window select the region.
You can select more than one region.
To select all regions, press [ALL].
3
Press [OK].
4
Select a register.
To select all registers, press [ALL].
5
Press [Effect Dissolve], turning it on.
6
Set the duration.
No. Parameter Adjustment
4 Eff Diss Dissolve duration
Duration
Setting the duration for a temporary
attribute
Set the following parameter to set the duration for a
temporary attribute in the Flexi Pad.
No. Parameter Adjustment
5 Temp Dur Temporary attribute dissolve
duration
Effect Status Display
The Effect >Effect 1-99 menu displays the following
information.
Region name: The selected region name appears in the
upper part of the list.
Register number
Register name
Write-protected status: When the register is write-
protected, a letter "L" appears.
Empty status: When the register is empty, a letter "E"
appears.
Effect Register Editing
You can carry out the following editing on effect registers
and master timeline registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another
register.
• Merge: Merges the data of two registers. It is not
possible to merge master timeline registers.
• Move: Move the contents of one register to another
register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.