Register Operations in the Menus
Using the Effect menu, you can carry out the following effect register
operations.
• Status display
• Register editing
To display the Effect menu
Press the top menu selection button [EFF] in the menu control block.
Effect Status Display
The Effect>Effect>Attribute menu displays the following information.
Region name: The selected region name appears in the upper part of the list.
Register number
Register name
Write-protected status: When the register is write-protected, an indication
Empty status: When the register is empty, the list is grayed out.
Effect Register Editing
You can carry out the following editing on effect registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another register.
• Merge: Add the contents of the current register to the end of the contents of
another register.
• Move: Move the contents of one register to another register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
For details of effect register operation, see "Snapshot Register Editing" (page
58).
Note that the method of selection of registers is as follows.
46
Register Operations in the Menus
"Lock" appears.
All: Turn on to select all registers.
Block: When this is "ON," you can select a contiguous block of registers.
In this case, in the status area, press on a desired register number or