Settings Relating To Video Switching (Transition Menu); Selecting The Bank To Make The Settings - Sony MVS-8000X User Manual

Settings Relating to Video
Switching (Transition
Menu)
For settings relating to video switching, use the Switcher
>Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 'Switcher' and
HF4 'Transition.'
The status area shows the transition preview, key
transition, bus toggle, and split fader settings for each M/E
and PGM/PST bank.
The following functions are available here.
• Transition Preview: Specify the operation mode for
transition preview for each of the M/E and PGM/PST
banks.
• Key Transition: Specify the operation mode for
independent key transitions.
• Bus Toggle: Switch the bus toggle for each of the M/E
and PGM/PST banks on or off.
• Split Fader: When the bus toggle is off, the split fader
settings are enabled. For each of the M/E and PGM/PST
banks, select enable or disable.
• Fade To Black: Enable or disable fade-to-black for each
final program output.
• Preset Color Mix: Set the stroke mode for a preset color
mix, the key status for a transition including a key, and
the mode in which the transition type after a transition
ends returns to the previous setting.
• Transition Curve: Set the relationship when carrying
out a transition, between the fader lever position and the
advancement state of the transition.
Selecting the Bank to Make the
Settings
In the Transition menu, using any of the following
methods, select the bank to which the settings apply, then
make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Bank M/E or P/P selection
to which settings
apply
The selected bank appears in reverse video.
536

Settings Relating to Video Switching (Transition Menu)

Setting the transition preview mode
To select the transition preview mode, in the <Transition
Preview> group of the Transition menu, select either of the
following.
One Time: The transition preview ends after a single
transition.
Normal: Switching the [TRANS PVW] button on or off
switches between the transition preview mode and the
normal mode.
Selecting the transition mode of the
independent key transition control block
To select the key transition mode, select either of the
following in the <Key Transition> group of the Transition
menu.
Same: The transition settings for the On and Off directions
are the same.
Independ: The transition settings for the On and Off
directions can be set separately.
Selecting the background transition flip-
flop mode
In the Transition menu, press [Bus Toggle], to switch
between on and off.
On: Flip-flop mode
Off: Bus fixed mode
For details, see "Fader Lever Operation in Bus Fixed
Mode" in Chapter 3 (Volume 1).
Setting the split fader to be enabled or
disabled
In the Transition menu, press [Split Fader] to switch
between Enable and Disable. This setting is only valid
when using a simple transition module with Bus Toggle set
to Off.
Notes
This setting is disabled for the CCP-9000A.
Enable: When the fader lever is split, the split fader effect
is enabled.
Disable: Even when the fader lever is split, the normal
fader lever effect is obtained.
Setting values
Enabling or disabling the fade-to-black
1 to 5
function
In the <FTB> group of the Transition menu, press the
program output name to toggle between On and Off.
Notes
This setting is disabled for the CCP-9000A.