Selecting Cross-Point Assign Tables - Sony MVS-8000SF User Manual

Knob
1
2
3
Press [Copy].
A confirmation message appears, asking whether or not to execute the
copy.
4
To execute the copy, press [Yes], and to cancel the operation, press [No].

Selecting Cross-Point Assign Tables

For the M/E-1 bank or PGM/PST bank, you can select the cross-point assign
table to be used. When the AUX delegation buttons of the AUX control block
in the control panel are selected, the table set for the M/E or P/P bank is used
as the cross-point assign table in the cross-point control block.
Notes
When manipulating the switcher buses with the MKS-8080/8082 AUX bus
remote panel, you can assign a different cross-point table for each bus.
However, it is not possible to assign cross-point tables 5 to 14.
1
In the Panel >Xpt Assign menu, use any of the following methods to select
the switcher bank.
• Press directly on the list on the left of the status area.
• Press the arrow keys on the list on the left to scroll the reverse video
cursor.
• Turn the knobs.
Knob
1
2
2
Using any of the following methods, select the table.
• Press directly on the list on the right of the status area.
• Press the arrow keys on the list on the right to scroll the reverse video
cursor.
• Turn the knob.
Parameter Adjustment
Left No Selection of copy source
Right No Selection of copy destination
Parameter
Bank/Bus No
Num
Setting values
1 to 15
1 to 14
Adjustment Setting values
Switcher bank 1 and upwards
selection
Number of 1 and upwards
selected switcher
banks
Cross-Point Settings (Xpt Assign Menu)
1013