Configuring Optional 6Pe Capabilities - HP FlexFabric 12900E Series Configuration Manual

•
Configure BGP on 6PE devices so that they can advertise tagged IPv6 routing information
through BGP sessions. The following describes only BGP configurations on 6PE devices.
To configure basic 6PE:
Step
1. Enter system view.
2. Enter BGP instance view.
3. Specify a 6PE peer or peer
group and its AS number.
4. Enter BGP IPv6 unicast
address family view.
5. Enable BGP to exchange
IPv6
information with the 6PE
peer or peer group.
6. Enable BGP to exchange
labeled IPv6 routes with
the 6PE peer or peer
group.

Configuring optional 6PE capabilities

Step
1. Enter system view.
2. Enter BGP instance view.
3. Enter
address family view.
4. Advertise
attribute to the 6PE peer or
peer group.
5. Advertise
community attribute to the
6PE peer or peer group.
6. Allow the local AS number to
appear in routes from the
6PE peer or peer group and
specify the repeat times.
7. Specify an AS path list to
filter routes advertised to or
received from the 6PE peer
or peer group.
8. Specify an IPv6 ACL to filter
routes
received from the 6PE peer
or peer group.
Command
system-view
bgp
instance-name
[ multi-session-thread ]
peer { group-name | ipv4-address
[
as-number
address-family ipv6 [ unicast ]
unicast routing
peer { group-name | ipv4-address
[ mask-length ] } enable
peer { group-name | ipv4-address
[
label-route-capability
Command
system-view
bgp
instance-name
[ multi-session-thread ]
BGP IPv6 unicast
address-family ipv6 [ unicast ]
COMMUNITY
peer { group-name | ipv4-address
[
advertise-community
extended
peer { group-name | ipv4-address
[
advertise-ext-community
peer { group-name | ipv4-address
[ mask-length ] } allow-as-loop
[ number ]
peer { group-name | ipv4-address
[
as-path-acl-number
import }
peer { group-name | ipv4-address
advertised to or
[
ipv6-acl-number { export | import }
as-number [
as-number
mask-length ] }
mask-length
as-number [
mask-length
mask-length
mask-length ] } as-path-acl
{
mask-length ] } filter-policy
293
Remarks
N/A
instance
] N/A
No 6PE peer is specified by
default.
N/A
This feature is disabled by
default.
This feature is disabled by
] }
default.
Remarks
N/A
instance
] N/A
N/A
By default, the COMMUNITY
] }
attribute is not advertised.
By default,
] }
community attribute is not
advertised.
By default,
number is not allowed to
appear in routes from the 6PE
peer or peer group.
By default, no AS path list is
export
| specified.
By default, no ACL is specified.
the extended
the local AS