HP FlexFabric 12900E Series Configuration Manual page 229

Step
2. Enter BGP instance view or
BGP-VPN instance view.
3. Create an EBGP peer group.
4. Create an IPv6 BGP peer
and specify its AS number.
5. Add the peer into the EBGP
peer group.
6. (Optional.) Configure
description for
group.
7. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
8. Enable the
exchange IPv6
routing information
peers in the specified peer
group.
To configure an EBGP peer group by using Method 2 (IPv4 multicast address family):
Step
1. Enter system view.
2. Enter BGP instance view.
3. Create an EBGP peer group.
4. Create an IPv4 BGP peer
and specify its AS number.
Command
•
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
•
Enter
view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. ip
vpn-instance-name
group group-name external
peer ipv6-address [ prefix-length ]
as-number as-number
peer ipv6-address [ prefix-length ]
group group-name [ as-number
as-number ]
a
peer group-name
the peer
text
address-family ipv6 [ unicast ]
router to
unicast
with
peer group-name enable
Command
system-view
bgp as-number
instance-name
[ multi-session-thread ]
group group-name external
peer ipv4-address [ mask-length ]
as-number as-number
217
Remarks
]
BGP-VPN instance
N/A
as-number
instance
]
vpn-instance
By default, no EBGP peer groups
exist.
By default, no IPv6 BGP peers
exist.
By default, no peers exist in the
peer group.
The
option, if used, must specify the
same AS number as the peer
ipv4-address
as-number
command.
description
By default, no description is
configured for the peer group.
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
Remarks
N/A
[ instance
] N/A
By default, no EBGP peer groups
exist.
By default, no IPv4 BGP peers
exist.
as-number as-number
[ prefix-length
as-number
]