HP FlexFabric 12900E Series Configuration Manual page 137

Re-optimization of the placement complete. Use 'display placement' to view the new
placement
# During the switchover period, display OSPF neighbors on Switch A to verify the neighbor
relationship between Switch A and Switch S.
<SwitchA> display ospf peer
OSPF Process 1 with Router ID 2.2.2.1
Neighbor Brief Information
Area: 0.0.0.0
Router ID Address
3.3.3.1 12.12.12.2
# Display OSPF routes on Switch A to verify if Switch A has a route to the loopback interface on
Switch B.
<SwitchA> display ospf routing
OSPF Process 1 with Router ID 2.2.2.1
Routing for network
Destination
44.44.44.44/32
14.14.14.0/24
22.22.22.22/32
12.12.12.0/24
Total nets: 4
Intra area: 4 Inter area: 0
# Display OSPF neighbors on Switch B to verify the neighbor relationship between Switch B and
Switch S.
<SwitchB> display ospf peer
OSPF Process 1 with Router ID 4.4.4.1
Neighbor Brief Information
Area: 0.0.0.0
Router ID Address
3.3.3.1 14.14.14.2
# Display OSPF routes on Switch B to verify if Switch B has a route to the loopback interface on
Switch A.
<SwitchB> display ospf routing
OSPF Process 1 with Router ID 4.4.4.1
Routing for network
Destination
44.44.44.44/32
Pri Dead-Time
1 37
Routing Table
Cost Type NextHop
2 Stub 12.12.12.2
2 Transit 12.12.12.2
0 Stub 22.22.22.22
1 Transit 12.12.12.1
ASE: 0
Pri Dead-Time
1 39
Routing Table
Cost Type NextHop
0 Stub 44.44.44.44
125
State
Full/BDR
AdvRouter
4.4.4.1
4.4.4.1
2.2.2.1
2.2.2.1
NSSA: 0
State
Full/BDR
AdvRouter
4.4.4.1
Interface
Vlan100
Area
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Interface
Vlan200
Area
0.0.0.0