HP FlexFabric 12900E Series Configuration Manual page 437

[SwitchD] display ospfv3 routing
-------------------------------------------------------------------------
I - Intra area route,
IA - Inter area route,
* - Selected route
*Destination: ::/0
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 4.4.4.4
Preference : 10
*Destination: 2001::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 3.3.3.3
Preference : 10
*Destination: 2001:1::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 3.3.3.3
Preference : 10
*Destination: 2001:2::/64
Type : I
Nexthop : ::
AdvRouter : 4.4.4.4
Preference : 10
*Destination: 2001:3::/64
Type : IA
NextHop : FE80::F40D:0:93D0:1
AdvRouter : 3.3.3.3
Preference : 10
Total: 5
Intra area: 1
The output shows that a default route is added, and its cost is the cost of a direct route plus the
configured cost.
4. Configure Area 2 as a totally stub area:
# Configure Area 2 as a totally stub area on Switch C.
[SwitchC-ospfv3-1-area-0.0.0.2] stub no-summary
# Display OSPFv3 routing table information on Switch D.
[SwitchD] display ospfv3 routing
OSPFv3 Process 1 with Router ID 4.4.4.4
E1 - Type 1 external route,
E2 - Type 2 external route,
Inter area: 4
425
N1 - Type 1 NSSA route
N2 - Type 2 NSSA route
Cost
Interface: Vlan400
Area
Cost
Interface: Vlan400
Area
Cost
Interface: Vlan400
Area
Cost
Interface: Vlan400
Area
Cost
Interface: Vlan400
Area
ASE: 0 NSSA: 0
: 11
: 0.0.0.2
: 2
: 0.0.0.2
: 3
: 0.0.0.2
: 1
: 0.0.0.2
: 4
: 0.0.0.2