HP FlexFabric 12900E Series Configuration Manual page 248

Step
3. Configure BGP
reception filtering policies.
To configure BGP route reception filtering policies (IPv6 unicast address family):
Step
1. Enter system view.
2. Enter BGP IPv6 unicast
address family
BGP-VPN IPv6
address family view.
Command
•
Reference an ACL or IP prefix list
to filter BGP routes received from
all
filter-policy { ipv4-acl-number |
prefix-list
import
•
Reference a routing policy to filter
BGP routes received from a peer
or
peer { group-name | ipv4-address
[ mask-length ] } route-policy
route-policy-name import
•
Reference an ACL to filter BGP
routes received from a peer or
route
peer
peer { group-name | ipv4-address
[ mask-length ] } filter-policy
ipv4-acl-number import
•
Reference an AS path list to filter
BGP routes received from a peer
or
peer { group-name | ipv4-address
[ mask-length ] } as-path-acl
as-path-acl-number import
•
Reference an IPv4 prefix list to
filter BGP routes received from a
peer
peer { group-name | ipv4-address
[ mask-length ] } prefix-list
prefix-list-name import
Command
system-view
•
Enter BGP IPv6 unicast address
family view:
a. bgp as-number [ instance
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
•
view or
Enter BGP-VPN IPv6 unicast
unicast
address family view:
c. bgp as-number [ instance
instance-name
[ multi-session-thread ]
d. ip
vpn-instance-name
e. address-family
[ unicast ]
236
peers:
prefix-list-name }
peer group:
group:
peer group:
or peer group:
]
ipv6
]
vpn-instance
ipv6
Remarks
Use at least one method.
By default, no route
reception filtering
configured.
Remarks
N/A
N/A
is