HP FlexFabric 12900E Series Configuration Manual page 231
Hide thumbs
Also See for FlexFabric 12900E Series:
- Installation manual (152 pages) ,
- Command reference manual (213 pages)
Table of Contents
Advertisement
To configure an EBGP peer group by using Method 3 (IPv6 unicast address family):
Step
1.
Enter system view.
2.
Enter BGP instance view or
BGP-VPN instance view.
3.
Create an EBGP peer group.
4.
Add a peer into the EBGP
peer group.
5.
(Optional.)
Configure
description
for
group.
6.
Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
7.
Enable
the
router
exchange
IPv6
routing
information
peers in the specified peer
group.
To configure an EBGP peer group by using Method 3 (IPv4 multicast address family):
Step
1.
Enter system view.
2.
Enter BGP instance view.
3.
Create an EBGP peer group.
4.
Add an IPv4 BGP peer into
the EBGP peer group.
5.
(Optional.)
Configure
description
for
group.
6.
Create
the
BGP
multicast address family and
enter its view.
Command
system-view
•
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
•
Enter
view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. ip
vpn-instance-name
group group-name external
peer ipv6-address [ prefix-length ]
group group-name as-number
as-number
a
peer
group-name
the
peer
text
address-family ipv6 [ unicast ]
to
unicast
with
peer group-name enable
Command
system-view
bgp
as-number
instance-name
[ multi-session-thread ]
group group-name external
peer ipv4-address [ mask-length ]
group group-name as-number
as-number
a
peer
group-name
the
peer
text
IPv4
address-family ipv4 multicast
219
Remarks
N/A
]
BGP-VPN
instance
N/A
as-number
instance
]
vpn-instance
By default, no EBGP peer groups
exist.
By default, no peers exist in the
peer group.
description
By default, no description is
configured for the peer group.
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
Remarks
N/A
[
instance
]
N/A
By default, no EBGP peer groups
exist.
By default, no peers exist in the
peer group.
description
By default, no description is
configured for the peer group.
By default, no BGP IPv4 multicast
address family exists.
Advertisement
Table of Contents
Troubleshooting
