HP FlexFabric 12900E Series Configuration Manual page 284

Step
3. Save all route updates from
the peer or peer group.
Configuring manual soft-reset
To configure manual soft-reset (IPv4 unicast/multicast address family):
Step
1. Enter system view.
2. Enter BGP instance view or
BGP-VPN instance view.
3. Enable BGP route refresh for
a peer or peer group.
4. Return to user view.
5. Perform manual soft-reset.
To configure manual soft-reset (IPv6 unicast address family):
Command
peer { group-name | ipv6-address
[ prefix-length ] } keep-all-routes
Command
system-view
•
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
•
Enter BGP-VPN
view:
a. bgp as-number
[
instance-name
[ multi-session-thread ]
b. ip vpn-instance
vpn-instance-name
•
Enable BGP route refresh for
the specified peer or peer
group:
peer { group-name
ipv4-address
[ mask-length
capability-advertise
route-refresh
•
Enable the BGP
refresh, multi-protocol
extension, and 4-byte AS
number features
specified peer or peer group:
undo peer { group-name |
ipv4-address
[ mask-length
capability-advertise
conventional
return
refresh bgp [
instance-name ] { ipv4-address
[ mask-length ] | all | external |
group group-name | internal }
{ export | import
{ multicast | [ unicast
vpn-instance
[
vpn-instance-name ] }
272
Remarks
By default, the routes are not
saved.
This command takes effect only
for the routes received after this
command is executed.
Remarks
N/A
]
instance
N/A
instance
]
|
] }
By default, the BGP route refresh,
multi-protocol
route
4-byte AS number features are
enabled.
for the
] }
N/A
instance
N/A
} ipv4
]
extension, and