HP FlexFabric 12900E Series Configuration Manual page 188

IPv4 Destination
-------------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
[SwitchD] display isis route
IPv4 Destination
-------------------------------------------------------------------------------
192.168.0.0/24
10.1.1.0/24
10.1.2.0/24
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
3. Run RIPv2 between Switch D and Switch E, and configure IS-IS to redistribute RIP routes on
Switch D:
# Configure RIPv2 on Switch D.
[SwitchD] rip 1
[SwitchD-rip-1] network 10.0.0.0
[SwitchD-rip-1] version 2
[SwitchD-rip-1] undo summary
# Configure RIPv2 on Switch E.
[SwitchE] rip 1
[SwitchE-rip-1] network 10.0.0.0
[SwitchE-rip-1] version 2
[SwitchE-rip-1] undo summary
# Configure IS-IS to redistribute RIP routes on Switch D.
[SwitchD-rip-1] quit
[SwitchD] isis 1
[SwitchD–isis-1] address-family ipv4
[SwitchD–isis-1-ipv4] import-route rip level-2
# Display IS-IS routing information on Switch C.
[SwitchC] display isis route
-----------------------------
IntCost ExtCost ExitInterface
10 NULL
10 NULL
10 NULL
Route information for IS-IS(1)
------------------------------
Level-2 IPv4 Forwarding Table
-----------------------------
IntCost ExtCost ExitInterface
10 NULL
20 NULL
20 NULL
Route information for IS-IS(1)
------------------------------
Level-1 IPv4 Forwarding Table
176
NextHop
NextHop
VLAN300 Direct
VLAN300 192.168.0.1
VLAN300 192.168.0.1
Flags
D/L/-
D/L/-
D/L/-
Flags
D/L/-
R/-/-
R/-/-