Configuring Ipv6 Pbr; Configuring Ipv6 Local Pbr; Configuring Ipv6 Interface Pbr - HP FlexFabric 12900E Series Configuration Manual

Configuring IPv6 PBR

Configuring IPv6 local PBR

Configure IPv6 PBR by applying a policy locally. IPv6 PBR uses the policy to guide the forwarding of
locally generated packets. The specified policy must already exist. Otherwise, the IPv6 local PBR
configuration fails.
You can apply only one policy locally. Before you apply a new policy, you must first remove the
current policy.
IPv6 local PBR might affect local services, such as ping and Telnet. Do not configure IPv6 local PBR
unless doing so is required.
To configure IPv6 local PBR:
Step
1. Enter system view.
2. Apply a policy locally.

Configuring IPv6 interface PBR

Configure IPv6 PBR by applying an IPv6 policy to an interface. IPv6 PBR uses the policy to guide the
forwarding of IPv6 packets received on the interface. The specified policy must already exist.
Otherwise, the IPv6 interface PBR configuration fails.
You can apply only one policy to an interface. Before you apply a new policy, you must first remove
the current policy from the interface.
You can apply a policy to multiple interfaces.
To configure IPv6 interface PBR:
Step
1. Enter system view.
2. Enter
view.
3. Apply
policy
interface.
4. Quit interface view.
5. (Optional.) Specify
an IPv6 policy for a
list
interfaces.
Command
system-view
interface
interface interface-type interface-number
an IPv6
to the
ipv6 policy-based-route policy-name
quit
ipv6 policy-based-route
of VLAN
apply vlan-interface interface-list
Command
system-view
ipv6 local policy-based-route
policy-name
policy-name
469
Remarks
N/A
By default, no policy is locally
applied.
Remarks
N/A
N/A
By default, no IPv6 policy is
applied to the interface.
N/A
By default, no IPv6 policy is
applied to the specified VLAN
interfaces.
When you want to specify an IPv6
policy for multiple
interfaces on a device, use this
command to simplify configuration
and save device resources.
VLAN