Controlling Rip Reception And Advertisement On Interfaces; Configuring A Rip Version - HP FlexFabric 12900E Series Configuration Manual

Step
3. Enable RIP on a network.
Enabling RIP on an interface
Step
1. Enter system view.
2. Enable RIP and enter RIP
view.
3. Return to system view.
4. Enter interface view.
5. Enable RIP on the interface.

Controlling RIP reception and advertisement on interfaces

Step
1. Enter system view.
2. Enter RIP view.
3. Disable an interface from
sending RIP messages.
4. Return to system view.
5. Enter interface view.
6. Enable
receive RIP messages.
7. Enable an interface to send
RIP messages.

Configuring a RIP version

You can configure a global RIP version in RIP view or an interface-specific RIP version in interface
view.
Command
network
[ wildcard-mask ]
Command
system-view
rip [ process-id ] [ vpn-instance
vpn-instance-name ]
quit
interface
interface-number
rip
[ exclude-subip ]
Command
system-view
rip [ process-id ] [ vpn-instance
vpn-instance-name ]
silent-interface { interface-type
interface-number | all }
quit
interface
interface-number
an interface to
rip input
rip output
network-address
interface-type
process-id enable
interface-type
27
Remarks
By default, RIP is disabled on a
network.
The network 0.0.0.0 command
can enable RIP on all interfaces in
a single process, but does not
apply to multiple RIP processes.
Remarks
N/A
By default, RIP is disabled.
N/A
N/A
By default, RIP is disabled on an
interface.
Remarks
N/A
N/A
By default, all RIP-enabled
interfaces can send
messages.
The disabled interface can still
receive RIP messages
respond to unicast
containing unknown ports.
N/A
N/A
By default, a RIP-enabled
interface can receive
messages.
By default, a RIP-enabled
interface can send
messages.
RIP
and
requests
RIP
RIP