HP FlexFabric 12900E Series Configuration Manual page 220

Step
2. Enter BGP instance view or
BGP-VPN instance view.
3. Create an IPv4 BGP peer
and specify its AS number.
4. (Optional.)
description for a peer.
5. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
6. Enable
exchange
routing information with the
specified peer.
Configuring a BGP peer (IPv6 unicast address family)
Step
1. Enter system view.
2. Enter BGP instance view or
BGP-VPN instance view.
3. Create an IPv6 BGP peer
and specify its AS number.
4. (Optional.)
description for a peer.
5. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
6. Enable
exchange
routing information with the
specified peer.
Command
•
•
peer ipv4-address as-number
as-number
Configure a
peer ipv4-address description
text
address-family ipv4 [ unicast ]
the router to
IPv4 unicast
peer ipv4-address enable
Command
system-view
•
•
peer ipv6-address as-number
as-number
Configure a
peer ipv6-address description
text
address-family ipv6 [ unicast ]
the router to
IPv6 unicast
peer ipv6-address enable
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
b. ip vpn-instance
vpn-instance-name
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
b. ip vpn-instance
vpn-instance-name
208
Remarks
]
N/A
]
By default, no IPv4 BGP peers
exist.
By default, no description is
configured for a peer.
By default, no BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family exists.
By default, the router cannot
exchange IPv4 unicast routing
information with the peer.
Remarks
N/A
]
N/A
]
By default, no IPv6 BGP peers
exist.
By default, no description is
configured for a peer.
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.
By default, the router cannot
exchange IPv6 unicast routing
information with the peer.