Advertising Ospf Link State Information To Bgp; Displaying And Maintaining Ospf - HP FlexFabric 12900E Series Configuration Manual

Step
2. Enter interface view.
3. Enable BFD control packet
mode for OSPF FRR.
To configure BFD echo packet mode for OSPF FRR:
Step
1. Enter system view.
2. Configure the source
IP address of BFD
echo packets.
3. Enter interface view.
4. Enable
packet
OSPF FRR.

Advertising OSPF link state information to BGP

After the device advertises OSPF link state information to BGP, BGP can advertise the information
for intended applications. For more information about BGP LS, see
To advertise OSPF link state information to BGP:
Step
1. Enter system view.
2. Enter OSPF view.
3. Advertise OSPF link state
information to BGP.

Displaying and maintaining OSPF

Execute display commands in any view and reset commands in user view.
Task
Display OSPF process information.
Display OSPF GR information.
Command
interface
interface-number
ospf primary-path-detect bfd ctrl
Command
system-view
bfd echo-source-ip ip-address
interface
interface-number
BFD echo
mode for
ospf primary-path-detect bfd echo
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
distribute bgp-ls
Command
display ospf [ process-id ] [ verbose ]
display ospf [ process-id ] graceful-restart [ verbose ]
interface-type
Remarks
N/A
By default, the source IP address of
BFD echo packets is not configured.
The source IP address cannot be on
the same network segment as any
local interface's IP address.
For more information about this
command,
Command Reference.
interface-type
N/A
By default, BFD echo packet mode for
OSPF FRR is disabled.
102
Remarks
N/A
By default, BFD control packet
mode for OSPF
disabled.
see High Availability
"Configuring BGP."
Remarks
N/A
N/A
By default, the device
does not advertise OSPF
link state information to
BGP.
FRR is