HP FlexFabric 12900E Series Configuration Manual page 238

Step
2. Enter BGP IPv4 unicast
address family
BGP-VPN IPv4
address family view, or BGP
IPv4 multicast address family
view.
3. Create a summary route in
the BGP routing table.
To configure BGP manual route summarization (IPv6 unicast address family):
Step
1. Enter system view.
Command
•
Enter BGP IPv4
address family view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp
[
view,
instance-name
unicast
[ multi-session-thread ]
d. ip
vpn-instance-name
e. address-family
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp
[
instance-name
[ multi-session-thread ]
g. address-family
multicast
aggregate
{ mask-length | mask } [ as-set |
attribute-policy
route-policy-name
detail-suppressed
origin-policy route-policy-name |
suppress-policy
route-policy-name ] *
Command
system-view
226
Remarks
unicast
as-number
instance
]
ipv4
as-number
instance
]
N/A
vpn-instance
ipv4
as-number
instance
]
ipv4
ipv4-address
| By default, no summary routes are
| configured.
Remarks
N/A