HP FlexFabric 12900E Series Configuration Manual page 245

Step
3. Configure BGP
distribution filtering policies.
To configure BGP route distribution filtering policies (IPv6 unicast address family):
Step
1. Enter system view.
Command
•
Reference an ACL or IP
prefix list to filter advertised
BGP
filter-policy
{ ipv4-acl-number
prefix-list prefix-list-name }
export [
process-id | ospf process-id |
rip process-id | static ]
•
Reference a routing policy to
filter BGP routes advertised
to a peer or peer group:
peer {
ipv4-address
[ mask-length
route-policy
route-policy-name export
•
Reference an ACL to filter
BGP routes advertised to a
route
peer or
peer {
ipv4-address
[ mask-length ] } filter-policy
ipv4-acl-number export
•
Reference an AS path list to
filter BGP routes advertised
to a peer or peer group:
peer {
ipv4-address
[ mask-length ] } as-path-acl
as-path-acl-number export
•
Reference an IPv4 prefix list
to filter
advertised to a peer or peer
group:
peer {
ipv4-address
[ mask-length ] } prefix-list
prefix-list-name export
Command
system-view
233
Remarks
routes:
|
direct | isis
group-name |
] }
Use at least one method.
peer group:
By default, no BGP distribution
group-name |
filtering policy is configured.
group-name |
BGP routes
group-name |
Remarks
N/A