Configuring Ipv6 Is-Is Link Cost - HP FlexFabric 12900E Series Configuration Manual

Step
13. Specify
number of ECMP routes
for load balancing.

Configuring IPv6 IS-IS link cost

Configuring an IPv6 IS-IS cost for an interface
Step
1. Enter system view.
2. Enter IS-IS view.
3. Specify an IS-IS cost
style.
4. Enter
family view.
5. Enable IPv6 IS-IS MTR.
6. Return to IS-IS view.
7. Return to system view.
8. Enter interface view.
9. Enable IPv6 for IS-IS on
the interface.
10. Specify an IPv6 cost for
the IS-IS interface.
Configuring a global IPv6 IS-IS cost
Step
1. Enter system view.
2. Enter IS-IS view.
3. Specify an IS-IS
cost style.
4. Enter IPv6 address
family view.
5. Enable IPv6 IS-IS
MTR.
6. Specify a global
IPv6 IS-IS cost.
Enabling automatic link cost calculation
Step
1. Enter system view.
Command
the maximum
maximum load-balancing number
Command
system-view
isis
vpn-instance-name ]
cost-style
wide-compatible
narrow-compatible } [ relax-spf-limit ] }
IPv6 address
address-family ipv6 [ unicast ]
multi-topology [ compatible ]
quit
quit
interface interface-type interface-number
isis ipv6 enable [ process-id ]
isis ipv6 cost
Command
system-view
isis [
vpn-instance-name ]
cost-style
compatible }
address-family ipv6 [ unicast ]
multi-topology [ compatible ]
circuit-cost cost-value [ level-1 | level-2 ]
Command
system-view
[ process-id ] [ vpn-instance
{ narrow |
| { compatible
process-id ] [ vpn-instance
{ wide | wide-compatible
448
Remarks
By default, the
number of ECMP routes equals
the maximum number of ECMP
routes supported by the system.
Remarks
N/A
N/A
wide |
By default, the IS-IS cost
|
type is narrow.
N/A
By default, IPv6 IS-IS MTR
is disabled.
N/A
N/A
N/A
By default, IPv6 is disabled
for IS-IS on an interface.
By default, no IPv6 cost is
specified for the interface.
Remarks
N/A
N/A
|
By default, the IS-IS cost
style is narrow.
N/A
By default, IPv6 IS-IS MTR
is disabled.
By default, no global IPv6
cost is specified.
Remarks
N/A
maximum