HP FlexFabric 12900E Series Configuration Manual page 306

Step
9. Specify an IPv6 prefix list to
filter routes advertised to or
received from the 6PE peer
or peer group.
10. Specify a routing policy to
filter routes advertised to or
received from the 6PE peer
or peer group.
11. Advertise a default route to
the 6PE peer or peer group.
12. Save all routes from the 6PE
peer or peer group.
13. Configure BGP updates sent
to the 6PE peer or peer
group to carry only public AS
numbers.
14. Specify the maximum
number of routes that BGP
can receive from the 6PE
peer or peer group.
15. Specify a preferred value for
routes received from the 6PE
peer or peer group.
16. Configure the device as a
route reflector and the 6PE
peer or peer group as a
client.
17. Configure the SoO attribute
for a peer or peer group.
18. Return to user view.
19. Display information about the
6PE peer or peer group.
20. Display routing information
advertised to or received
from the 6PE peer or peer
group.
21. Soft-reset a BGP
connection.
22. Reset a BGP
connection.
Command
peer { group-name | ipv4-address
[ mask-length
ipv6-prefix-name { export | import }
peer { group-name | ipv4-address
[ mask-length
route-policy-name { export | import }
peer { group-name | ipv4-address
[ mask-length
default-route-advertise
[ route-policy route-policy-name ]
peer { group-name | ipv4-address
[ mask-length ] } keep-all-routes
peer { group-name | ipv4-address
[ mask-length ] } public-as-only
peer { group-name | ipv4-address
[ mask-length
prefix-number [ { alert-only discard |
reconnect reconnect-time
percentage-value ] *
peer { group-name | ipv4-address
[ mask-length ] } preferred-value
value
peer { group-name | ipv4-address
[ mask-length ] } reflect-client
peer { group-name | ipv4-address
[ mask-length ] } soo site-of-origin
return
display bgp
instance-name ] peer ipv6 [ unicast ]
[ ipv4-address
{ ipv4-address
group-name }
[ ipv4-address ] verbose ]
display bgp
instance-name ] routing-table ipv6
[ unicast ] peer
{ advertised-routes
received-routes } [ ipv6-address
prefix-length | statistics ]
refresh bgp
6PE
instance-name
[ mask-length ] { export | import }
ipv6 [ unicast ]
reset bgp
6PE
instance-name
[ mask-length ] ipv6 [ unicast ]
294
Remarks
By default, no IPv6 prefix list is
prefix-list
] }
specified.
By default, no routing policy is
route-policy
] }
specified.
] } By default, no default route is
advertised.
By default, routes from a peer
or peer group are not saved.
By default, BGP updates sent
to a 6PE peer or peer group
can carry both public and
private AS numbers.
By default, the number of
route-limit
] }
routes that a router can receive
from the 6PE peer or peer
} |
group is not limited.
By default, the preferred value
is 0.
By default, no route reflector or
client is configured.
By default, no SoO attribute is
configured for a peer or peer
group.
N/A
[ instance
mask-length |
Available in any view.
| group-name
log-info |
instance
[
ipv4-address
Available in any view.
|
instance
[
] ipv4-address
Available in user view.
instance
[
] ipv4-address Available in user view.