HP FlexFabric 12900E Series Configuration Manual page 237

Step
1. Enter system view.
2. Enter
address
BGP-VPN
address family view, or BGP
IPv4 multicast address family
view.
3. Configure automatic route
summarization.
Configuring manual route summarization
By configuring manual route summarization, you can do the following:
•
Summarize both redistributed routes and routes injected using the network command.
•
Determine the mask length for a summary route.
To configure BGP manual route summarization (IPv4 unicast/multicast address family):
Step
1. Enter system view.
Command
system-view
•
•
BGP IPv4 unicast
family view,
IPv4 unicast
•
summary automatic
Command
system-view
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
d. ip vpn-instance
vpn-instance-name
e. address-family
[ unicast ]
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
g. address-family
multicast
225
Remarks
N/A
]
ipv4
]
N/A
ipv4
]
ipv4
By default, automatic
summarization is not configured.
Remarks
N/A
route