HP FlexFabric 12900E Series Configuration Manual page 246

Step
2. Enter BGP IPv6 unicast
address family
BGP-VPN IPv6
address family view.
3. Configure BGP
distribution filtering policies.
Command
•
Enter
address family view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
•
view or
Enter BGP-VPN IPv6 unicast
unicast address family view:
c. bgp
[
instance-name
[ multi-session-thread ]
d. ip
vpn-instance-name
e. address-family
[ unicast ]
•
Reference an ACL or IPv6
prefix list to filter advertised
BGP
filter-policy
{ ipv6-acl-number
prefix-list ipv6-prefix-name }
export [ direct | isisv6
process-id
process-id | ripng process-id
| static ]
•
Reference a routing policy to
filter BGP routes advertised
to a peer or peer group:
peer
ipv6-address
[ prefix-length
route-policy
route-policy-name export
•
Reference an ACL to filter
route
BGP routes advertised to a
peer
peer
ipv6-address
[ prefix-length ] } filter-policy
ipv6-acl-number export
•
Reference an AS path list to
filter BGP routes advertised
to a peer or peer group:
peer
ipv6-address
[ prefix-length ] } as-path-acl
as-path-acl-number export
•
Reference an IPv6 prefix list
to filter
advertised to a peer or peer
group
peer
ipv6-address
[ prefix-length ] } prefix-list
ipv6-prefix-name export
234
Remarks
BGP IPv6 unicast
as-number
instance
]
ipv6
N/A
as-number
instance
]
vpn-instance
ipv6
routes:
|
| ospfv3
{ group-name |
] }
Use at least one method.
By default, no BGP distribution
or peer group:
filtering policy is configured.
{ group-name |
{ group-name |
BGP routes
{ group-name |