Protocols And Standards; Is-Is Configuration Task List - HP FlexFabric 12900E Series Configuration Manual

CLV Code
10
128
129
130
131
132
222
229
235
237

Protocols and standards

•
ISO 10589 ISO IS-IS Routing Protocol
•
ISO 9542 ES-IS Routing Protocol
•
ISO 8348/Ad2 Network Services Access Points
•
RFC 1195, Use of OSI IS-IS for Routing in TCP/IP and Dual Environments
•
RFC 2763, Dynamic Hostname Exchange Mechanism for IS-IS
•
RFC 2966, Domain-wide Prefix Distribution with Two-Level IS-IS
•
RFC 3277, IS-IS Transient Blackhole Avoidance
•
RFC 3358, Optional Checksums in ISIS
•
RFC 3373, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
•
RFC 3567, Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication
•
RFC 3719, Recommendations for Interoperable Networks using IS-IS
•
RFC 3786, Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit
•
RFC 3787, Recommendations for Interoperable IP Networks using IS-IS
•
RFC 3847, Restart Signaling for IS-IS
•
RFC 4444, Management Information Base for Intermediate System to Intermediate System
(IS-IS)
•
RFC 5303, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
•
RFC 5310, IS-IS Generic Cryptographic Authentication

IS-IS configuration task list

Tasks at a glance
Configuring basic
•
(Required.)
•
(Optional.)
•
(Optional.)
Name
Authentication Information
IP Internal Reachability Information
Protocols Supported
IP External Reachability Information
Inter-Domain Routing Protocol Information
IP Interface Address
MT-ISN
M-Topologies
MT IP. Reach
MT IPv6 IP. Reach
IS-IS:
Enabling IS-IS
Setting the IS level and circuit level
Configuring P2P network type for an interface
139
PDU Type
IIH, LSP, SNP
LSP
IIH, LSP
L2 LSP
L2 LSP
IIH, LSP
LSP
IIH, LSP
LSP
LSP