HP FlexFabric 12900E Series Configuration Manual page 228

Hide thumbs Also See for FlexFabric 12900E Series:
Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter BGP instance view or
BGP-VPN instance view.
3.
Create an EBGP peer group.
4.
Create an IPv4 BGP peer
and specify its AS number.
5.
Add the peer into the EBGP
peer group.
6.
(Optional.)
Configure
description
for
group.
7.
Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
8.
Enable
the
router
exchange
IPv4
routing
information
peers in the specified peer
group.
To configure an EBGP peer group by using Method 2 (IPv6 unicast address family):
Step
1.
Enter system view.
Command
system-view
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
Enter
view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. ip
vpn-instance-name
group group-name external
peer ipv4-address [ mask-length ]
as-number as-number
peer ipv4-address [ mask-length ]
group group-name [ as-number
as-number ]
a
peer
group-name
the
peer
text
address-family ipv4 [ unicast ]
to
unicast
with
peer group-name enable
Command
system-view
216
Remarks
N/A
]
BGP-VPN
instance
N/A
as-number
instance
]
vpn-instance
By default, no EBGP peer groups
exist.
By default, no IPv4 BGP peers
exist.
By default, no peers exist in the
peer group.
The
option, if used, must specify the
same AS number as the peer
ipv4-address
as-number
command.
description
By default, no description is
configured for the peer group.
By default, no BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family exists.
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
Remarks
N/A
as-number
as-number
[
mask-length
as-number
]

Advertisement

Table of Contents
loading

Table of Contents